|
|
|
In the 1st shot you will see the sticker I had made up for COLLECT BONUS, as you can see I had 2 made up. These days sign-makers can re-create just about anything, it isn't always expensive, especially if you have Photoshop or similar and can do some of the prep work for them. In this case it was simple as I just sent them a photo of the area and they used Photoshop to match the red colour and they gave me an A4 size sheet of the red which I cut the shape out of myself. I also told them the type of font to use and the size of the lettering to use for the COLLECT BONUS sticker.
In this next shot you can see the red patch cut to shape and stuck down in place. I still have to sand back and re-colour that white area.
And here is the whole area finished, it is not completely perfect and I will sand that grey off and re-do the black lines but it is a 100 times better than it used to be.
There is plenty more of my Paragon to see - go back to my main Paragon page and check it out.
David is a fellow pin restorer located in the USA, you can see his main site here.
See what he did with a Genie playfield that needed repair here.
|
